Annex Electrical Work Torque Adapter M4 1.4N・m ATA-M4 1 piece

Catalog number: ATA-M4 Features: ● Set torque prevents over-torque. ● Ideal for tightening screws on electrical boards. ● Can use double-ended and single-ended bits with a total length of 35 mm or less. ● Can be attached to interchangeable handles and drill drivers (7.2 V or less recommended). Applications: ● For managing screw tightening torque on electrical boards, etc. Specifications: ● Total length (mm): 75 ● Set torque (N・m): 1.4 ● Compatible screw size: M4 ● Bit insertion port two-sided width (mm): 6.35 ● Capacity (N・m): 1.4 ● Torque accuracy (%): ±10% ● Shank diameter: 6.35 mm ● Compatible screw size: M4 Material/Finish: ● Carbon steel, piano wire, aluminum alloy, neodymium magnet Caution: ● Set torque: Based on tightening screws on electrical boards. ● Please note that the set torque will vary depending on the conditions of use even if the screw size is the same. ● When using an electric screwdriver: We recommend that the electric screwdriver speed is 250 rpm or less. ●Depending on the electric screwdriver, the set torque may not be reached, so be sure to tighten the screw manually after turning it. ●When loosening a screw (reverse rotation): Applying excessive torque may cause damage, so be careful not to loosen screws that have been tightened with anything other than this product.