RakuHapi Air Conditioner Anti-Mold Gap Wiper Replacement 5 Sheets 1 Piece

Cleans the air outlet and coats it with an anti-mold coating! Replacement sheet. Replacement sheet exclusively for the "Raku Hapi Air Conditioner Anti-Mold Scratch Wiper." ●Just wipe it around your air conditioner vents and gaps to prevent mold for up to two months! Eliminates mold-causing bacteria in air conditioner air outlets and prevents mold growth! *Depends on usage environment. ●Anti-mold sheet with five effects. ・Mold prevention: Anti-mold coating for up to 2 months. (*Depends on usage environment.) ・Bacteria elimination: 99%. (*Not all bacteria are eliminated.) - Deodorization: Removes moldy odor. -Removes dirt: Removes dust and black mold stains. -Dust guard: Prevents dust from sticking. ●Special wiper that reaches deep into gaps (sold separately). -Slim: Maximum width 25mm, making it easy to use even in small areas. - Flexible elasticity: Flexibly fits the curves of the inner wall. - Wave-shaped head: The wave-shaped unevenness also scrapes off dirt. ●Wet type, fragrance-free. ●For replacement. *The wiper body is not included. [Product name] Anti-mold wet sheet for air conditioner outlets 【component】 Antifungal ingredients (cetylpyridinium chloride, isopropylmethylphenol), cleaning ingredients (non-ionic surfactants), dust guard ingredients, coating agents, deodorants 【humoral】 neutral [Sheet material] polyester [Sheet size] Approx. 215mm x 40mm [How to use] *Please use the dedicated wipers that come with the "RakuHapi Air Conditioner Anti-Mold Gap Wiper" (sold separately). (1) Turn off the air conditioner and be sure to unplug it from the outlet. (If you cannot unplug it, turn off the breaker.) (2) When the power is turned off, the flap (upper and lower air direction louvers, air direction plate) at the air outlet is closed, so please open it slowly by hand. (3) Insert the wiper along the inner wall from the air conditioner's air outlet and wipe. ・One sheet can prevent mold inside the air outlet of one air conditioner. (If you are particularly concerned about dirt, use a second sheet.) -You can use it on either side. ★How to install anti-mold sheet (1) Cover the head with the anti-mold sheet. (2) Fix the mold-proof sheet by passing a round hook through the hole (notch) on the edge of the sheet. [Precautions for use] ・Do not use for any purpose other than intended. - Cannot be used with air conditioners that do not have a flap (upper and lower air direction louvers) at the air outlet that opens. - Do not use on air conditioner fins, blower fans, outdoor units, or air conditioner electrical components (sensors, electronic boards, switches, or motors). -Wash your hands thoroughly with water after use. -If you have sensitive skin, use kitchen gloves. ・Do not rub your eyes or face with your hands after touching the sheet. If the product gets into your eyes, rinse immediately with water. - The sheet loses its anti-mold effect once it dries, so use it immediately after taking it out of the bag. ・Do not leave the sheet out of the bag for a long period of time, as this may cause discoloration of the area where it is placed. ・When moving the air conditioner flaps (up and down louvers, air deflectors), move them slowly. Moving them too quickly can cause them to break. ・Do not use too much force when using the product. The louvers may come off or the fan or wipers may be damaged. ・Do not force the wiper head into gaps that it will not fit in. This may cause the sheet to come off or damage the wiper. - If the sheet comes off, secure it firmly with a rubber band or something similar. ・The sheets do not dissolve in water, so do not flush them down the toilet. - When the wiper head becomes dirty, wash it with water and dry it thoroughly. - Keep out of reach of children, near open flames, in direct sunlight, or in high temperatures.