Sanko Techno Grip Anchor GA-D Type Hot Dip Galvanized M16 GA-16MD 25 Pieces

Catalog number: GA-16MD Features: ●The installation surface is flat, so the anchor will not get in the way even after the equipment (facilities) is removed. ●The range of uses can be expanded by selecting the bolt according to the specifications. Uses: ●For concrete ●Installation of pipe hanging hardware, light ceiling construction, installation of air conditioning ducts, cable rack hanging, installation of scaffolding, etc. Specifications: ●Screw size: M16 ●Outer diameter (mm): 21.5 ●Total length (mm): 60 ●Screw length (mm): 25 ●Drill diameter (mm): 22.0 ●Maximum tensile load (kN): 33.3 ●Embedding depth (mm): 60 ●Drilling depth (mm): 68 ●Boxed Material/Finish: ●Steel ●Hot-dip galvanized ●Surface treatment: Hot-dip galvanized (dip) Note: ●The maximum tensile load is the value when the concrete strength Fc=21N/[[MM2]]. ●A dedicated holder is required for installation. ●Be sure to remove the cutting chips from the pilot hole. ●Check that the cone is attached to the main body and set it in the pilot hole.