Digital temperature controller (with program function) -100 to 600°C TP-4NK 1 unit

Temperature control is an ON/OFF control method. The temperature display uses a two-stage PV/SV display that allows the actual measured value and set value to be seen at a glance, preventing setting errors. Equipped with a program function, it is possible to set up to 8 steps and 4 patterns. Possible to switch between forward and reverse operation. Equipped with a circuit protector, alarm output function, and sensor abnormality detection function. Temperature setting: -100 to 600°C Minimum display unit: 1℃ Temperature display accuracy: ±(0.5% of set value + 1 digit)℃ or ±3℃, whichever is greater (TP-4NK 1digit=1 / TP-4NP 1digit=0.1) Temperature control method: ON/OFF control Temperature setting display: Sheet key touch type, PV/SV digital two-level display Sensor type: K thermocouple (φ4×200mm) Connection capacity: AC100V 50/60Hz MAX12A (resistive load) *Do not directly connect inductive load equipment (motors, pumps, etc.) to this device. Additional features: Program function/8 steps, 4 patterns Safety features: Circuit protector (15A), alarm output function, sensor abnormality detection Power supply: AC100V 50/60Hz Body size: 95 x 150.6 x 48.5 mm (excluding protrusions) The product number for this product will be changed due to a change in the specifications of the main power switch. The main power switch of the successor model will be changed to red. There will be no other changes. Replacement: 1-5825-21 Digital temperature controller (with programmable function) -100 to +600°C