Pocket Digital Tester EA707D-24 1 piece

Manufacturer: Sanwa Electric Instruments (Sanwa) Model number: PM3 Operation method: Δ-Σ method AC detection method: Average value method Range switching: Auto range Operating environment conditions: Altitude below 2000m, Environmental pollution level II Operating temperature and humidity: 80% RH (maximum) at 5°C to 31°C. Linearly decreasing from 80% RH to 50% RH at 31°C to 40°C Storage temperature and humidity: -10℃ to 40℃, 80% RH or less (no condensation) 40℃ to 50℃, 70% RH or less (no condensation) Accuracy guaranteed range: 23±5℃, 80% RH or less (no condensation) DC voltage: 400m/4/40/400/500V Input resistance: 10M to 100MΩ AC voltage: 4/40/400/500V Input resistance: 10M to 11MΩ (40 to 400Hz (sine wave)) Resistance: 400/4k/40k/400k/4M/40MΩ Open voltage: Approx. DC 0.4V Capacitance: 5n/50n/500n/5μ/50μ/200μF Frequency: 9.999/99.99/999.9/9.999k/60.00kHz Highest accuracy: DC voltage / ±(0.7%rdg+3dgt) AC voltage / ±(2.3%rdg+10dgt) Resistance/±(2.0%rdg+5dgt) Capacitance / ±(5.0%rdg+10dgt) (Accuracy after relative cancellation) Frequency/±(0.7%rdg+5dgt) (Accuracy at 10 to 250Vrms) Resolution: DC voltage/0.1mV AC voltage/0.001V Resistance: 0.1Ω Capacitance/0.001nF Frequency: 0.001Hz Duty ratio: 0.1 to 99% Continuity: Buzzer sounds at 10Ω to 120Ω or less (open voltage/0.4V) Diode test: Open voltage/approx. 1.5V Display: Numerical part 4000 Over display: "OL" is displayed in the numerical value area Polarity display: Only "-" is displayed when negative input is made Sampling rate: Numerical part: approx. 3 times/sec Frequency response: 40-400Hz Power supply: 1 x CR2032 (coin type lithium battery) Battery life: Approx. 150 hours at DCV Battery life warning: Battery symbol lights up Power consumption: 6mW typical (at DCV) Size: 56(W) x 11.5(D) x 108(H) mm Weight: Approx. 50g (main unit only) Test lead length: Total length/approx. 0.5m Pin tip/13mm Function: Data hold Auto power off (power turns off approx. 30 minutes after last operation) Relative function (relative value display) Continuity check function Safety standard: IEC 61010 CAT.Ⅱ500V EMC Directive: IEC 61326 RoHS Directive: EN 50581 Accessories: Notebook-style case operating instructions Test lead/directly attached to the main body (total length 0.5m/pin tip 13mm) Ultra-thin, multi-functional, compact, 8.5mm thick 0.7% maximum accuracy Capacitor capacity measurement *Capacitor capacity measurement with large leakage current is not possible Frequency measurement (sine wave AC only)