Union Tool Carbide End Mill Ball UDCB2003-0021 1 piece

Catalog number: UDCB2003-0021 Features: ● Diamond coating for machining cemented carbide, with outstanding hardness, toughness, and adhesion. ● Achieves a good machining surface without burrs, especially in rough to finish machining. ● A ball end mill that can cut cemented carbide. ● Adopts a blade shape that is optimal for machining cemented carbide, achieving an amazing "deep" cut. ● A ball end mill that can cut cemented carbide and hard brittle materials. (Advanced version of UDCB) ● Newly improved blade shape and diamond coating significantly improve the machining removal volume. ● The groove at the tip of the ball provides an outstanding finishing surface. ● Special treatment is applied to the cutting edge to minimize chipping and steps on the workpiece, making it suitable for a wide range of machining from rough to finish. Applications: ● Workpiece: cemented carbide, hard brittle materials. Specifications: ●Ball radius (mm): 0.15 ●Blade length (mm): 0.21 ●Total length (mm): 50 ●Shank diameter (mm): 4 ●Surface treatment: UDC coating ●Shank taper angle (Bta) (°): 16 ●Twist angle 0° ●Made in an ISO9001 certified factory ●Made in an ISO14001 certified factory ●UDC coating ●2-blade diamond coated ball end mill for machining cemented carbide UDCB Material/Finish: ●Fine particle alloy (MG) Note: ●The shank taper angle is a guideline. ●If interference with the workpiece is required, be sure to measure it and confirm. ●Be careful of contact between the shank and the workpiece. ●To prevent the blade tip from vibrating, do not chuck the shank part that has coating on it.