Union Tool Carbide Alloy UDC Coated 2-Blade Long Neck Radius for Machining Hard and Brittle Materials UDCLRSF2010-005020 1 Piece

Catalog number: UDCLRSF2010-005020 Features: ●This is an advanced version of the long-necked radius end mill UDCLRS, which can cut carbide and hard brittle materials. ●By improving the diamond coating and adopting the optimal blade shape, it is possible to make an incredible "deep" cut and extend the tool life. ●By applying a special treatment to the cutting edge, it is possible to minimize chipping and steps on the edge of the workpiece, and it is widely applicable from medium roughing to finishing processing. Specifications: ●Corner radius (mm): R0.05 ●Blade length (mm): 0.5 ●Total length (mm): 50 ●Shank diameter (mm): 4 ●Number of blades (pieces): 2 ●Surface treatment: UDC COAT ●Effective length (mm): 2 ●Number of blades: 2 ●Outer diameter (mm): 1 ●UDC coat ●Twist angle 0° ●Radius type ●2 blades Material/Finish: ●Fine particle carbide alloy (MG) Note: ●The shank taper angle is a guideline. ●If interference with the workpiece is required, be sure to measure it and check it. ● Be careful not to let the shank come into contact with the workpiece. ● To prevent the tip of the blade from vibrating, do not chuck the shank if it has coating on it.