Tabletop ionizer BF-X2ME 1 unit

Because it uses the HDC-AC method, the discharge needle is resistant to dirt and provides stable static elimination performance for a long period of time. Two types of louvers allow you to select the static elimination area. The discharge needle is less prone to wear and dirt, providing stable static elimination performance for a long period of time. The louvers and discharge needle units can be removed and attached without the need for tools, making maintenance easy. Even with long-term use, the discharge needle wears very little, eliminating the need to replace it due to wear. In the event of a power supply or fan abnormality, an LED and abnormality signal will notify you. The angle of the main body is adjusted with a locking mechanism, so the angle is unlikely to change due to vibration. Dimensions (mm): 150 x 182 x 76 - Weight(kg):1 Ozone generation: 0.004 ppm or less (distance 150 mm) Ion balance (distance 300 mm, factory default): ±3 V or less Air volume: 1.4 to 3.5 m3/min Wind speed: 1.5 to 2.9 m/sec (center of 300 mm distance of straight louver), 0.1 to 0.3 m/sec (center of 300 mm distance of wide angle louver) Input power: DC24V (AC adapter included, AC100-240V compatible) Capacity: 12VA Output voltage: ±7,500V0-P Accessories: AC adapter, wide-angle louver, output signal lead wire (set of 2) Static electricity removal time: 1.5 seconds or less (distance 300 mm, factory default setting) Operating environment: Ambient temperature: 0 to 40°C, Ambient humidity: 15 to 85% RH (no condensation) Filter: Pre-filter grade Output signal: MOS FET relay non-voltage contact output (NC output) (OFF when high voltage or fan abnormality occurs) Noise: 63dB(A) (distance 1m) Material: Body: ABS resin, Discharge needle: Tungsten, Stand: SECC, Louver: PC・ASA