Junkosha Brass Fitting (Inch Series) Nipple 3.18 x 2.36 mm PT1/8 PN-1/8-PT1/8-BS 1 pc

Catalog number: PN-1/8-PT1/8-BS Features: ●The tube insert is held by a sleeve and a cap nut, allowing for a secure connection. ●The connection is designed to be free of abnormalities until the tube is broken. ●Comes with colored thread seals for each R (PT) thread size. Applications: ●For pneumatic piping. ●For water pressure piping. ●For hydraulic piping. Specifications: ● Compatible tube outer diameter D (mm): 3.18 ● Hexagonal side (mm): 10 ● Connection diameter: R1/8 ● Fluid used: air, water, oil, organic solvents ● Hexagonal side (mm) body: 10 ● Compatible tube inner diameter (mm): 2.36 ● Hexagonal side (mm) mounting nut: 8 ● Fluid used: air, water, oil, organic solvents ● Fluid temperature: -20 to 60°C (air), 0 to 60°C (water), -20 to 60°C (oil), -20 to 60°C (organic solvents) ● Maximum operating pressure: Complies with the maximum operating pressure of the tube ● Vacuum pressure used: 0.014kPa or more (excluding US, when the fluid used is air) ● Applicable tubes (when the fluid used is air): Nylon tubes (AS1, AS2, AS4), Spot welding equipment tubes (SP4, SPF), Polyurethane tubes (US, UH, UF, UFL, UE, UC), Multilayer tubes ( AP1, AP4, UP1) ●Applicable tubes (when the fluid used is water): Nylon tubes (AS1, AS2, AS4), Spot welding equipment tubes (SP4, SPF), Polyurethane tubes (UF, UFL), Multilayer tubes (AP1, AP4, UP1) ●Applicable tubes (when the fluid used is oil): Nylon tubes (AS1, AS2, AS4), Multilayer tubes (AP1, AP4, UP1) ●Applicable tubes (when the fluid used is organic solvents): Multilayer tubes (AP1, AP4, UP1) Material/Finish: ●Brass Caution: ●Do not freeze. ●When using tubes other than those applicable, the outer diameter accuracy should be within ±0.1mm for nylon and ±0.15mm for urethane, and the roundness should be within 0.2mm (maximum outer diameter - minimum outer diameter).