Grass cutting tipped saw 230 x 36P 5-piece set CK-230S 1 set (5 pieces)

Tip saw for brush cutter Recommended for brush cutters under 25cc Tip grinding, rake angle grinding, both side grinding The blade edge is fully ground for excellent sharpness. Because it has holes, it is lightweight, reducing fatigue and increasing work efficiency. The embedded chip makes it shock resistant. It is lightweight so it reduces fatigue. Compatible with all manufacturers' engine-powered brush cutters. Number of teeth: 36P Hole diameter: 25.4mm Outer diameter: 230mm Quantity: 5 pieces caveat If this product comes into contact with stones, cans, bottles, electrical wires, or other hard objects that are not intended to be cut, the blade may break and fragments may fly off, or fragments of the hard object may fly off as the blade rotates and hit the operator or objects around the operator, causing injury or damage. Please use with great caution. Note Since tipped saws are sharp objects, please be careful when handling them, wear leather gloves, and avoid touching them with bare hands. Always stop the engine when installing, removing or inspecting the chip saw. Follow the installation instructions for the brush cutter you are using, carefully check the direction of rotation, and install securely. Always test run the machine before use to check that there are no abnormalities such as damage, vibration, or wobble of the tip saw. For safety, be sure to wear a helmet or hat, protective glasses, gloves, long-sleeved shirt, boots, etc. when working. Do not allow people within a 1.5m radius while working. If any abnormality occurs during operation, immediately stop the engine and check it. Avoid working on hard objects such as stones or concrete. Immediately replace any damaged, warped or dull tipped saw blades.