Material: Steel
Total length: 1410-1800mm
Pillar diameter: Upper pipe/φ16×860mm, Lower pipe/φ19×940mm
Fixing holder inner diameter: Upper part/φ23.5mm, Lower part/φ20mm
Weight: 1.1kg
Rear installation
*May not be able to be installed on some types of wheelchairs.
Conditions for wheelchair installation
The backrest pipe must be either φ19mm, φ22mm, or φ25mm.
It has a tipping bar and is approximately φ18.6mm.
The distance from the top of the tipping bar to the bottom of the seat should be between approximately 113 and 280 mm.
The length of the tipping bar must be at least 70mm from the rear top of the backrest pipe.
There must be no obstacles in the installation space above the tipping bar.
The backrest does not recline.
(※ Although the instruction manual says "tipping bar", it is Tipping Bar, so we added "i".
