BURRTEC Copper Center Wheel Brush C-2 1/2 1691300 1 piece

Catalog number: 1691300 Features: ● Small diameter (Φ25 to Φ76) wheel brush ● Destructive testing is conducted based on the US national standard (ANSI) and the maximum rotation speed is set. ● Can be used at high speeds of 20,000 RPM and can be stacked to create a wide brush ● Made of SUS302, so it is resistant to rust and corrosion ● Perfect balance ● Paired ring structure ● RoHS Directive (2011/65/EU), RoHS Directive ((EU)2015/863) compliant product Applications: ● For removing burrs, rust, scale and carbon. ● For cleaning screws and boiler tubes. ● For cleaning inner surfaces and hard-to-reach areas. ● For homogenizing edges. ● For cleaning and polishing the inner and outer surfaces of tubes. ● For exterior finishing. ● For roughening surfaces for adhesion. ● For maintenance work on aircraft, space rockets, shipbuilding, nuclear power and chemical plants. ● For wire stripping. Specifications: ●Outer diameter (mm): 64 ●Wire diameter (mm): 0.3 ●Thickness (mm): 12.7 ●Hole diameter (mm): 12.7 ●Hair length (mm): 17.46 ●Maximum operating speed (rpm): 20000 ●Compatible adapter: An arbor/plastic adapter (sold separately) is required for installation. ●Tools that can be installed: Micro grinder, drill, automatic machine Material/Finish: ●SUS: Stainless steel wire (brush material) Caution: ●Select the type of machine and type of power brush that are appropriate for the intended use. Using a model other than the compatible model or using it for purposes other than its intended use can lead to accidents and is dangerous. Do not use for purposes other than its intended use. ●Check the maximum allowable rotation speed (circumferential speed) printed on the package, label, catalog, and other related documents, and use within the allowable range. Never use it beyond this range. ●When operating the power brush, be sure to wear a brush protective cover, gloves, safety helmet, dust-proof tight-fitting protective glasses, and a mask for safe work. ● Generally, when using a power brush, burrs, scale, dirt, slag, etc. are thrown out with considerable force along with the filament (broken wire), so keep anything that is easily flammable, explosive, or damaged away from the area. Also, wear clothing that covers your skin so that the grinding dust does not come into direct contact with your hands and feet. ● If the wire brush filament (broken wire) or grinding dust scatters, it can be dangerous, so people in the vicinity of the work site (within 15m of the brush) should also wear protective glasses and clothing while working. (As a consideration for people in the vicinity other than the worker, install curtains, or instruct people to keep out or block off the area.)