BURRTEC Wyler Rocket End Brush D13 x SD6 SUS 0.26 MCFE-20S 1033600 1 piece

Catalog number: 1033600 Features: * Pinpoint targeting to destroy burrs and rust * Maximum rotation speed is set after conducting destructive tests based on the US national standard (ANSI). ●The tip is tapered so the bristles do not spread even when rotating●Supports high speed rotation●The tip is tapered to reduce the load on the wire and reduce scattering●Standard product, so delivery is quick●Complies with RoHS Directive (2011/65/EU) and RoHS Directive ((EU)2015/863) Applications:●Removing carbon from turbine fins, polishing and maintenance●Engine overhaul work●Polishing corners after welding Specifications:●Wire diameter (mm): 0.26●Bristle material: Stainless steel●Outer diameter (mm): 16●Bristle length (mm): 22●Shaft length (mm): 18●Shaft diameter (mm): 6●Maximum operating speed (rpm): 25000●Total length (mm): 65●Applicable tools: Straight grinder, drill, automatic machine Material/Finish:●SUS: Stainless steel wire (brush material) Caution:●Select the type of machine and type of power brush that are appropriate for the intended use. Using a model other than the compatible model or using it for purposes other than the intended use is dangerous and may lead to accidents. Do not use for purposes other than the intended use. ●Check the maximum allowable rotation speed (circumferential speed) printed on the package, label, catalog, and other related documents, and use within the allowable range. Never use it beyond this range. ●When operating the power brush, be sure to wear a brush protective cover, gloves, a safety helmet, dust-proof tight-fitting protective glasses, and a mask for safe operation. ●When using a power brush, burrs, scale, dirt, slag, etc. are generally scattered with considerable force along with the filament (wire fragments), so keep away anything that is easily flammable, explosive, or damaged. Also, work in clothes that cover your skin so that the grinding powder does not directly hit your hands or feet. ●If the wire brush filament (wire fragments) or grinding powder scatters, it is dangerous, so people around the work area (within 15m of the brush) should also wear protective glasses and protective clothing during work. (As a consideration for people in the vicinity other than the worker, please install curtains, etc., or clear people or give instructions to block the area.)