PISCO Nylon Tube Black 10X7.5mm 20M NA1075-20-B 1 Roll

Catalog number: NA1075-20-B Features: *Excellent pressure resistance, abrasion resistance, and cold resistance. *Resistant to bending fatigue, allowing for long-term stable use. *Cut marks are provided at approximately 500 mm intervals for easy cutting of the tube. Specifications: Color: Black; Outer diameter (mm): 10; Inner diameter (mm): 7.5; Minimum bending radius (mm): 30; Total length (m): 20; Maximum operating pressure (MPa): 2.0 (20℃ 65%RH); Operating temperature range (℃): For air: -20 to 100 (no freezing); For water and heat transfer oil: -15 to 90 (no freezing); Operating fluid: Air, water (conditions apply), heat catalyst oil (conditions apply); Wall thickness (mm): 1.25; Tube outer diameter (φD) (mm): φ10; Tube inner diameter (φD) (mm): φ7.5; Minimum mounting radius (mm): 45; Operating pressure: 1.5MPa (20℃ (at 65% RH)● Vacuum pressure used: -100kPa● Temperature range used: -15 to 90°C (no freezing)● Made in an ISO14001 certified factory● Made in an ISO9001 certified factory Material/Finish: ● Nylon (PA12) Caution: ● Do not apply loads such as tension, twisting, or extreme bending to the tube. This may cause the tube to collapse, burst, or come loose. ● Do not scratch the tube by rubbing or entangling it. This may cause the tube to burst. ● The tube's burst pressure decreases with increasing temperature, so be sure to understand the operating pressure and ensure a sufficient safety margin. ● Use the tube at or above the minimum bending radius. ● When piping the tube, ensure that there is sufficient margin taking into account changes in length, etc.