PISCO mold temperature control joint elbow type 10 tube 10mm thread R1/4 AKL10-1002 1 piece

Catalog number: AKL10-1002 Features: ●The connection part (plug) and the threaded part (socket) can be separated. The mold is machined in advance to match the screw size, the threaded part is embedded using a hex wrench, and the connection part can be connected by simply inserting it later. In addition, by pressing the release sleeve to remove the fitting, no protrusions remain on the mold. ●The type with built-in stop valve allows safe removal and installation of the fitting. (Hot water will not spill when connecting or disconnecting the fitting.) Specifications: ● Compatible tube outer diameter D (mm): 10 ● Connection port size: R1/4 ● Hexagonal face size (mm): 8 ● Maximum operating pressure (MPa): 0.9 ● Operating temperature range (℃): 0 to 60 (no freezing) ● Operating fluid: air, water (conditions apply), heat transfer oil ● Operating temperature range: 0 to 60℃ (air), 0 to 99℃ (water), 0 to 120℃ (heat transfer oil) (no freezing) ● Maximum operating pressure: 0.9MPa Material/Finish: ● Body: Brass + electroless nickel plating ● Sealing rubber: Hydrogenated nitrile rubber (HNBR) Caution: ● When using water or heat transfer oil as the fluid, be sure to observe the following conditions. 1. When using water or heat transfer oil, keep the surge pressure below the maximum operating pressure. 2. When using water or heat transfer oil, be sure to use an insert ring.