PISCO mold temperature control joint straight 08 type tube 8mm thread R1/8 AKC08-801 1 piece

Catalog number: AKC08-801 Features: ●The connection part (plug) and the threaded part (socket) can be separated. The mold is machined in advance to match the screw size, the threaded part is embedded using a hex wrench, and the connection part can be connected by simply inserting it later. In addition, by pressing the release sleeve to remove the fitting, no protrusions remain on the mold. ●The type with built-in stop valve allows safe removal and installation of the fitting. (Hot water will not spill when fitting or removing the fitting.) Specifications: ● Compatible tube outer diameter (mm): 8 ● Connection port size: R1/8 ● Hexagonal side (mm): 5 ● Total length (mm): 44.3 ● Fluid used: Air, water (conditions apply), heat transfer oil ● Compatible tube outer diameter D (mm): 8 ● Operating temperature range: 0 to 60°C (air), 0 to 99°C (water), 0 to 120°C (heat transfer oil) (no freezing) ● Maximum operating pressure: 0.9MPa Material/Finish: ● Body: Brass + electroless nickel plating ● Sealing rubber: Hydrogenated nitrile rubber (HNBR) Caution: ● When using water or heat transfer oil as the fluid, be sure to observe the following conditions: 1. When using water or heat transfer oil, keep the surge pressure below the maximum operating pressure. 2. When using water or heat transfer oil, be sure to use an insert ring.