SANWA Digital Multimeter PC773 PC-connected type 1 unit

Catalog number: PC773 Features: *Displays 11,000 counts, highest accuracy is 0.28 (DCV), supports true RMS (AC only). *Outer periphery is made of impact-resistant elastomer. *Includes a continuity check function that turns on a red LED at the same time as the buzzer sounds. *Includes auto power-off function (approx. 30 minutes). *Includes backlight. *Measurement data can be recorded on a PC using the optional PC Link7 and KB-USB773, expanding the range of uses. *True RMS measurement method. *Includes data hold and range hold functions. Applications: *For equipment maintenance. *For research and development, electronics work. Specifications: ● DC voltage (V): 1000 ● AC voltage (V): 1000 ● DC current (A): 11 ● AC current (A): 11 ● Resistance (Ω): 110M ● Detection method: True RMS rectification ● Continuity check: Buzzer sounds at less than 30Ω ● Calibration documents: Supported ● Power supply (V): 2 x AA (R6) (monitor batteries included) ● Width (mm): 82 ● Depth (mm): 44 ● Height (mm): 166 ● Power supply: 2 x AA (R6) (monitor batteries included) ● Capacitor capacity (F): 110m ● Continuity: 3 Buzzer sounds and lamp lights up when less than 0Ω●Diode test: Approximately battery voltage●Continuous use time (h): Approximately 200 hours●Frequency (Hz): 1.1M●Maximum display (counts): 11000●Length (m): 166●Maximum display: 11000 counts●Width x depth x height: 82 x 44 x 166mm●CE standard product●Battery life: 200 hours●Detection method: True RMS rectification●Power supply: 2 AA batteries (R6P) (included)●Fuse specification 1: 315mA/1000V/IR30kA Φ6.35×32mm ceramic tube (F1206) ●Fuse specification 2: 12A/1000V/IR30kA Φ10×38mm ceramic tube (F1207) Set contents/accessories: ●Test leads ●Instruction manual ●Instruction manual ●Test leads (TL-25a) Caution: ●Do not use if the main unit or test leads are damaged. ●Do not hold the test pin side of the test probe from the flange during measurement. ●Connect the ground side (black test lead) of the test lead first, then connect the live side (red test lead). When disconnecting, remove the live side first. ●Do not switch to another function or range or plug the test lead plug into another measurement terminal during measurement. ●Use fuses of the specified shape and rating.