Catalogue number: PM11 Features: ● Equipped with a test rod fixing function that allows measurements to be made while holding the main unit. ● Test leads can be stored in the main unit. ● CE standard product. ● Compliant with safety standards IEC1010 CAT [R3] 300V, CAT [R2] DC/AC500V. ● Maximum display: 4000 counts ● Equipped with a bar graph function that allows you to check numbers with an analog image ● Test lead length is 50cm, pin tip is 15mm Applications: ● For facility equipment maintenance. ● For electronics work. ● For electrical work. ● For building maintenance. ● For facility preservation maintenance. Specifications: ● DC voltage (V): 500 ● AC voltage (V): 500 ● DC current (A): - ● Resistance (Ω): 40M ● Detection method: Average value rectification (MEAN) ● Continuity check: Buzzer sounds at approximately 35Ω or less Open voltage: Approximately 1.2V ● Calibration documents: Supported ● Power supply (V): Button type alkaline battery (LR44) x 2 (included) ● Width (mm): 76 ● Depth (mm): 18 ● Height (mm): 117 ● Power supply: Button type alkaline battery (LR44) x 2 (included) ● Width (mm): 76 ● Depth (mm): 18 ● Height (mm): 117 ● Continuous use time (h): Approximately 200 ● Maximum display (count): 4000 ● Diode test: Open voltage is almost the battery voltage ● Complies with international safety standard CAT. [3] 300V ● With test rod fixing function ● Equipped with bar graph Set contents / accessories: ● Instruction manual Caution: ●Do not use if the main unit or test leads are damaged. ●Do not hold the test pin side of the test probe from the flange during measurement. ●Connect the grounded side of the test leads (black test lead) first, then the live side (red test lead). When disconnecting, remove the live side first. ●Do not switch to another function or range or insert the test lead plug into another measurement terminal during measurement. ●Use fuses of the specified shape and rating.
