Catalog number: PM3 Features: ●Ultra-thin, compact type with a body thickness of 8.5 mm. ●CE-certified product. ●Complies with safety standard IEC1010 CAT [R2] DC/AC500V. ●Maximum display: 4000 counts ●Capacitor capacity measurement (aluminum electrolytic capacitors with large leakage current cannot be measured) ●Frequency measurement (sine wave AC only) ●Duty ratio measurement (AC waveform, etc.) ●Data hold function ●Relative function (relative value display) ●Releasable auto power off function that operates in about 15 minutes Applications: ●For electrical work and equipment maintenance. ●For electronic work. ●For building maintenance. ●For building maintenance. ●For facility preservation maintenance. Specifications: ●DC voltage (V): 500 ●AC voltage (V): 500 ●Resistance (Ω): 40M ●Detection method: Average value rectification (MEAN) ●Continuity check: Buzzer sounds at 10 to 120 Ω or less Open voltage: Approx. 0.4V●Calibration documents: Supported●Power supply (V): 1 x coin-type lithium battery (CR2032) (included)●Width (mm): 56●Depth (mm): 11.5●Height (mm): 108●Power supply: 1 x coin-type lithium battery (CR2032) (included)●Width (mm): 56●Depth (mm): 11.5●Height (mm): 108●Continuous use time (h): Approx. 150 hours●Capacitor: 200μF●Maximum display (count): 4000●Diode test: Open voltage 1.5V●Frequency (kHz): 60●Battery life 150 hours●Relative value measurement function●Auto power off function●Test lead length 50cm●Test lead pin tip 13mm Set contents/accessories:●Instruction manual Caution:●Do not use if the main unit or test lead is damaged.●Do not hold the test pin side of the test probe beyond the flange during measurement. ●Connect the grounded side of the test lead (black test lead) first, then connect the live side (red test lead). When disconnecting, remove the live side first. ●During measurement, do not switch to another function or range, or insert the test lead plug into another measurement terminal. ●Use fuses of the specified shape and rating.
