SANWA True RMS digital clamp meter DCM660R 1 unit

Catalog number: DCM660R Features: ● True RMS measurement possible (AC). ● INRUSH (inrush current) measurement function (within approximately 100 ms, from 10A). ● MAX/MIN hold function. ● LCD display has backlight. ● Frequency measurement possible with either clamp or test lead. ● Data hold function. ● Disableable auto power save function that activates after approximately 15 minutes. Applications: ● For facility equipment maintenance. ● For electrical work. Specifications: ●AC current (A): 660 ●DC voltage (V): 600 ●AC voltage (V): 600 ●Resistance (Ω): 660 ●Detection method: True RMS rectification ●Calibration documents: True RMS rectification ●Power supply (V): 2 x AAA alkaline batteries (LR03) (included) ●Width (mm): 69 ●Depth (mm): 38 ●Height (mm): 208 ●Power supply: 2 x AAA alkaline batteries (LR03) (included) ●Continuity check: Buzzer sounds at approximately 30 Ω or less Open circuit voltage: approx. 1.2V●Frequency (Hz) voltage: 100k●Frequency (Hz) current: 30.00k●Maximum measurement conductor diameter (mm): φ50●Maximum display (count): 6600●Clamp diameter: 30mm●Display count: 6600 counts●Width x depth x height (mm): 69 x 38 x 208●Battery life: 55 hours●Can measure up to AC660A Set contents/accessories:●Instruction manual●Carrying case C-DCM-660●Test lead TL-23a Caution:●This is a low-voltage clamp meter. Do not use on circuits with a voltage to ground exceeding 600V. ●Do not switch to other functions during measurement. ●When attaching or detaching from a live conductor, wear insulating protective gear such as electrical rubber gloves. ●Do not input signals that exceed the maximum rated input value. ●Do not hold the test pin side of the test probe beyond the barrier or the clamp sensor beyond the barrier during measurement.