SANWA High-Accuracy PC-Connectable Digital Multimeter PC720M 1 unit

Catalogue number: PC720M Features: ● Equipped with data memory (logging) function on the main unit. ● Supports true RMS (AC). ● Dual display. ● Peak hold function. ● MAX/MIN recording function. ● Data transfer to PC possible (requires separate dedicated cable (KB-USB7) and software (PCLink7)). ● Includes magnet for hanging on metal surfaces ● Equipped with high-speed response bar graph ● Equipped with low input impedance type ACV/DCV/Ω automatic discrimination function Applications: ● For research and development. ● For electronic work. ● For electrical work and equipment maintenance. Specifications: ● DC voltage (V): 999.9 ● AC voltage (V): 999.9 ● DC current (A): 10 ● AC current (A): 10 ● Resistance (Ω): 60M ● Detection method: True RMS rectification ● Continuity check: Buzzer at 20Ω to 300Ω ● Calibration documents: Supported ● Power supply (V): 1 x 9V alkaline battery (6LF22) (included) ● Width (mm): 86 ● Depth (mm): 52 ● Height (mm): 184 ● Power supply: 1 x 9V alkaline battery (6LF22) (included) ● Capacitor capacity (F): 25.00m ● Diode test: Open voltage Approx. 3.5V●Duty ratio: 0-100.0%●Temperature (°C) -50-1000●Resistance (Ω) 60.00M●Frequency (Hz): 15-50k●Capacitor: 25mF●Maximum display: 9999 counts●Width x Depth x Height: 86 x 52 x 184mm●Battery life: 100 hours●Detection method: True RMS●Power supply: 1 x 9V alkaline battery (6LF22) (included)●Frequency measurement (sine wave AC only) possible●Logic frequency and duty ratio measurement possible●Conductance measurement●Warning buzzer for incorrect insertion into current-only terminal Set contents/accessories:●Instruction manual●Test lead TL-23a●Holster H-700●K-type thermocouple temperature sensor K-250PC Caution:●Do not use if the main unit or test lead is damaged.●Do not hold the test pin side of the test probe beyond the flange during measurement. ●Connect the grounded side of the test lead (black test lead) first, then connect the live side (red test lead). When disconnecting, remove the live side first. ●During measurement, do not switch to another function or range, or insert the test lead plug into another measurement terminal. ●Use fuses of the specified shape and rating.