Catalog number: DCM400 Features: ●Frequency can be measured using both the clamp and test lead. ●CE-certified product. ●Complies with safety standards IEC1010 CAT [R2] 600V, CAT [R3] 300V. ●Display count: 4000 counts ●Bar graph function allows intuitive judgment of measurement values with an analog image ●Data hold function ●Battery consumption display function ●Continuity buzzer function ●Auto power off function that operates in approximately 30 minutes (cannot be disabled) Applications: ●For electrical work and facility equipment maintenance. ●For electrical work. Specifications: ●AC current (A): 400 ●DC voltage (V): 600 ●AC voltage (V): 600 ●Resistance (Ω): 400 ●Detection method: Average value rectification (MEAN) ●Calibration documents: Average value rectification (MEAN) ●Power supply (V): 2 x AAA alkaline batteries (R03) (included) ●Width (mm): 50 ●Depth (mm): 28 ●Height (mm): 193 ●Power supply: 2 x AAA alkaline batteries (R03) (included) ●Width (mm): 50 ●Depth (mm): 28 ●Height (mm): 193 ●Continuous use time (h): approx. 150 ●Maximum measurement conductor diameter (mm): 34 ●Maximum display (counts): 4000 ●Clamp diameter (mm): 25 ●Complies with international safety standard CAT.[3]300V ●Battery life 150 hours ●Maximum display: 4000 counts Set contents/accessories: ●Instruction manual ●Carrying case C-DCM400 ●Test lead TL-23a Caution: ●This is a low-voltage clamp meter. Do not use on circuits with a voltage to ground exceeding 600V. ●Do not switch to other functions during measurement. ●When connecting to or disconnecting from a live conductor, always wear insulating protective gear such as electrical rubber gloves. ●Do not input signals that exceed the maximum rated input value. ●During measurement, do not hold the test pin side of the test probe beyond the barrier or the end of the clamp sensor's barrier.
