SANWA DC/AC compatible digital clamp meter DCM2000DR 1 unit

Catalog number: DCM2000DR Features: ● Equipped with a dual display function that can simultaneously display "AC current and its frequency". ● Compliant with international safety standard CAT.[4] 1000V ● Can measure up to AC2000A (true RMS) ● Equipped with a low-pass filter function that is convenient for measuring variable frequency drive (VFD) circuits ● Low input impedance type ACV/DCV/Ω automatic discrimination function ● Data hold/range hold/peak hold function (5ms) ● Relative function (relative value display) ● Disableable auto power save function that operates in about 34 minutes Applications: ● For electrical work and facility maintenance. ● For electrical work. Specifications: ● DC current (A): 2000 ● AC current (A): 2000 ● DC voltage (V): 1000 ● AC voltage (V): 1000 ● Resistance (Ω): 40M ● Detection method: True RMS rectification ● Calibration documents: Supported ● Power supply (V): 2 AA batteries (R6P) (included) ● Width (mm): 97 ● Depth (mm): 43 ● Height (mm): 264 ● Power supply: 2 AA batteries (R6P) (included) ● Leakage current (mA): Cannot be measured ● Frequency (Hz): 10 to 1999 ● Safety standard: IEC61010 CAT.4 1000V ● Resolution DC current: 0.1A DC voltage: 0.001V Resistance: 0.1Ω AC current: 0.1A AC voltage: 0.001V Resistance: 0.1Ω●Maximum display (counts): 6000●Maximum measurement conductor diameter (mm): 66●Clamp diameter (mm): 55●Maximum display: 6000 counts●Maximum measurement conductor diameter: 66mm●LPF function convenient for measuring variable frequency drive (VFD) circuits●Low input impedance type ACV/DCV/Ω automatic discrimination function that reduces the influence of ghost voltage●Data hold/range hold/relative value measurement/peak hold function (5ms)●Auto power save (approx. 34 minutes)●Complies with international safety standard CAT.[4]1000V●Battery life 80 hoursSet contents/accessories:●Instruction manual●Carrying case C-DCM2000DR●Test lead TL-29Caution:●This is a clamp meter with DMM function for low voltage. Do not use on circuits exceeding 1000V.●Do not switch to other functions during measurement.●When attaching or detaching to a live conductor, wear insulating protective equipment such as electrical rubber gloves. ●Do not input a signal that exceeds the maximum rated input value. ●During measurement, do not hold the test pin side of the test probe beyond the barrier or the part beyond the barrier of the clamp sensor.