Catalog number: TSNJ-0519 Features: ●This drill screw has an extremely thin head of 0.9 mm, so even when used in places without countersinks, the head does not protrude much. ●Even if another attachment is fastened on top of the screw, unevenness is unlikely to occur. Applications: ●Fastening thin steel plates and steel frames, etc. Specifications: ●Maximum compatible plate thickness (mm): 3.2 ●Head diameter (mm): 10 ●Head thickness (mm): 0.9 ●Compatible driver: Phillips No. 2 ●Nominal dimension (mm) L1: 7 ●Nominal dimension (mm) H: 0.9 ●Nominal dimension (mm) d x L: 5 x 19 ●Nominal dimension (mm) D: 10 Material/Finish: ●Stainless steel (SUS410) ●Surface treatment: Passivated treatment Caution: ●When fastening wood-based materials or if there is a gap between the base steel plate and the upper steel plate, the plate may float and the cutting tip of the screw may break. ●Not suitable for mounting metal fittings with pilot holes with a thickness of 2 mm or more, such as angles and flat bars.
