TRUSCO Bit Insert Screw M6 x 13.0 D1 = 8.0 D2 = 8.3 6 pieces Y0SB-M6L13D8 1 PK

Catalog number: Y0SB-M6L13D8 Features: ●Easy to use, well-balanced insert nut in all respects such as retention and cost. ●Threads can be formed mainly by pressing into resin without threads, or by hot pressing with a soldering iron. ●Inserting by hot pressing can prevent the resin from cracking. Uses: ●As a thread reinforcement for resin. Specifications: ●Compatible bolt thread: M6 ●Drill hole diameter (mm): Approximately 8.05 ●Thread designation: M6 ●Thread pitch: 1.0 ●Dimensions (mm) L: 13.0 ●Dimensions (mm) D1: 8.0 ●Dimensions (mm) D2: 8.3 ●Dimensions L (mm): 13.0 ●Applicable material: Thermoplastic resin ●Recommended heating temperature: 200-250℃ Material/Finish: ●Brass Caution: ●When pressing in the insert, force is applied from the top of the mating boss, so make the outer diameter thicker to prevent cracking. ●To avoid scratching the insert, place a punch or board over it and then use a hammer or something similar to hit it from above to insert it.