TRUSCO Wheel Brush Φ150X12.7(13)mm Hole Brass Plated Steel Wire Wire Diameter 0.25 TB-6361 1 pc

Catalog number: TB-6361 Features: ● The brush is disc-shaped, with bristles planted radially toward the outside. ● Machines and tools used: Double-headed grinders, bench grinders, etc. ● When pressing the workpiece (material to be polished) against the brush to polish it, use the appropriate pressure (pressure that only slightly touches the tip of the brush bristles). ● Please note that using excessive pressure will not only reduce the durability of the brush, but may also cause serious accidents. ● Basically, choose bristles that are as close as possible to the workpiece (material to be polished). ● When using the brush, be sure to wear protective gear (protective glasses, protective gloves, etc.) to prevent serious accidents. ● Applications: Polishing metal surfaces, deburring, cleaning, paint stripping, etc. ● Inspect the brush before use, and immediately discontinue use if any abnormalities are found in the brush or during use. Applications: ● Polishing metal surfaces, rust removal, deburring, paint stripping. Specifications: ●Outer diameter (mm): 150 ●Wire diameter (mm): 0.25 ●Thickness (mm): 16 ●Hole diameter (mm): 12.7 ●Bristle length (mm): 30 ●Maximum operating speed (rpm): 3800 ●Metal fitting diameter (mm): 90 ●Compatible with double-headed, bench and tabletop electric grinders ●Brass-plated steel wire 0.25mm Material/Finish: ●Metal fitting: Steel (zinc-plated iron material) ●Bristle material: Brass-plated steel wire Caution: ●Use at a maximum rotation speed of 3800 rpm or less. ●Always wear protective gear such as a hard hat and safety glasses when working. ●Use within the maximum operating speed range. ●The disc-shaped brush has a 12.7 (13) mm hole in the center and can be attached to tools, machines, etc. if they have a shaft of the same diameter.