Catalogue number: NEJ-3 Features: ● Easily remove stripped and crushed screws. ● Can turn screws that can no longer be turned with a screwdriver. ● The direction of rotation for drilling holes and removing screws is the same, counterclockwise, so it is difficult to make a mistake. ● Comes with an O-ring so that the size and direction can be seen at a glance. Applications: ● Removing stripped and crushed screws, etc. Specifications: ●Blade tip: Drill/Screw ●Blade diameter (mm): Drill tip diameter: 3.7, Screw tip diameter: 3.6 ●Shank diameter (mm): 6.35 ●Total length (mm): 82 ●Applicable screws: NEJ-1: M3-M4, NEJ-2: M5-M6, NEJ-3: M6-M8 ●Shank diameter: 6.35mm ●Polished finish (drill part) ●Weight (g): 18 Material/Finish: ●Bit material Set contents/Accessories: ●Contents: Set of 3 (NEJ-1: 1 piece/NEJ-2: 1 piece/NEJ-3: 1 piece) Caution: ●Please check the correct purpose, size, and usage before use. Overloading may cause damage to the screw or injury. ●Do not use for striking work. ●Cannot be used for drill screws, course threads, and other hard screws. ●If the tip is worn or damaged, replace it with a new one. ●When using an electric impact, do not subject it to impact, shock, or vibration. Cannot be used on stuck screws.
