Catalog number: 220USB-S1 Features: ●The LED light has a delay setting that keeps it lit for 5 seconds after use. ●Aluminum sleeve chuck that can be used with double-ended and single-ended bits. ●Slide switch operation allows forward and reverse rotation with light force. ●Four times faster than the Electric Drill Ball (220USB). ●Low recoil (low torque) specification with little recoil when seated, allowing support with just the fingers. Applications: ●For assembling electrical boards and installing fixtures and exterior materials. Specifications: ● Maximum tightening torque (N・m): 0.4 (when electrically operated) ● Body dimensions (mm): 140 ● Socket size (mm): 6.35 ● Color: Gray ● No-load speed (min［［の−１力］］): 1200 ● Voltage (V): 3.6 ● Rated current (A): 0.8 ● Chuck capacity (mm): 6.35 ● Overall length (mm): 140 ● Maximum tightening torque (N・m): 10 (when manually operated) ● Handle diameter (mm): 45 ● Durability torque (when manually operated): 10N･m ● Applicable bits: Opposite side 6.35mm (single-headed and double-headed bits) ● Battery capacity: Li-Ion 3.6V 800mAh ● Charging time: Approximately 60 minutes ● Number of charges: Approximately 500 times ● Continuous use time: Approximately 40 minutes (when unloaded) ● Charging method: USB charging (Micro USB Type-B) Material/Finish: Body: Glass fiber reinforced nylon, elastomer Bit: Special alloy steel Set contents/Accessories: Bit: [+]2 (100mm) x 1 USB charging cable (1m) Caution: Be sure to read the instruction manual for the power tool. Be careful of short circuits and electric shocks when working with electricity. Overloading can cause screws to break or injuries. Keep out of reach of children when storing this product at home.
