1000BASE-T compatible switching hub EHC-G05MN2-HJB 1 piece

This 1000BASE-T compatible 5-port hub with built-in power supply and metal case has a power saving function that cuts off the power supply to ports when not communicating, allowing you to save up to 77% of power.* *Measurements were taken when transferring data from a load device to the hub, and comparing the power consumption after 1 minute when all ports were communicating and not communicating. In addition to using a metal case with excellent heat dissipation properties, it also has an operating temperature limit of 50°C, allowing it to be used safely even in environments prone to high temperatures. It is equipped with a loop detection function that notifies you of the occurrence of network loops that may affect network operation. The LED lamp will flash to notify you and encourage you to quickly resolve the network problem. The fanless design makes it ideal for use in places where quiet operation is required, such as bedrooms and offices. By reducing the number of moving parts, we have achieved high reliability and durability. Since no electrolytic capacitors are used on the main board, a long life design has been achieved. The AC power cable has been fitted with anti-tracking measures to prevent tracking caused by dust, even if the cable is left in place for a long period of time. The compact design means that it can be installed anywhere. In addition to being installed horizontally, it can also be easily attached to a steel desk or wall using magnets, and can also be wall-mounted using the wall-mounting hole on the back of the unit. Connection method: 1000BASE-T, 100BASE-TX, 10BASE-T Network Type: IEEE802.3ab, IEEE802.3u, IEEE802.3 Switching method: Store and forward Buffer memory: 128Kbytes (dynamically allocated to each port) Flow control: IEEE802.3x (full duplex), back pressure (half duplex) Switch fabric: 10.0Gbps Maximum packet forwarding capacity: 7.5Mpps Filtering speed: 1,488,000 packets/sec (1000Mbps), 148,800 packets/sec (100Mbps), 14,880 packets/sec (10Mbps) Number of registered MAC addresses: 2,048 (total for all ports) Number of ports: 5 ports AutoMDI/MDI-X: Supported Auto-negotiation: Supported (1000/100/10Mbps) Connector type: RJ-45 x 5 Compatible cables: 10BASE-T/UTP Category 3 or higher, 100BASE-TX/UTP Category 5 or higher, 1000BASE-T/UTP Category 5e or higher Non-blocking: Supported Jumbo frames: Supported (9Kbytes) Loop detection function: Loop detection MTBF: 564,000 hours EAP Transparency: Supported BPDU transparency function: Supported Input voltage: AC100-240V±10% 50/60Hz Power consumption (rated): maximum 3.0W Heat output: Maximum approx. 10.8 kJ/h Power saving function: Easy Energy Saving E (IEEE 802.3az) compatible Energy efficiency: 0.6W/Gbps Maximum effective transmission speed: 5.0Gbps External dimensions (width x depth x height): approx. 127.5 x 83.6 x 30.0 mm (main unit only) Weight: Approx. 330g Housing material: Metal Color: Black Operating environment conditions: Temperature: 0°C to 50°C, Humidity: 10% to 90% (no condensation) Storage environment conditions: Temperature: -40°C to 70°C, Humidity: 5% to 90% (no condensation) Installation direction: Horizontal installation, wall mounting, magnet Wall mounting hole: Yes Warranty period: 1 year Compliance with laws and regulations: Compliant with EU RoHS Directive Compliance standard: VCCI Class B Accessories: 1 dedicated AC power cable (2-pin, approx. 1.8m), 1 safety sheet *The rubber feet and magnets are attached to the product body at the time of shipment. *Please keep the magnet attached even when installing horizontally.