Bath Anti-Mold Mender 40 Pushes, Unscented, 1 Piece

Prevent mold in the bath with a simple push. Prevent mold in the bath without smoke! Also prevents mold in the bathroom once every two weeks + specific prevention measures. ●Push five times while changing directions around the bathroom space, and the anti-mold ingredients will spread throughout the bathroom, killing the bacteria that cause black mold and pink slime. ●Point processing for areas of concern. Just one pump directly onto areas where you are concerned about black mold or pink slime! You can easily and conveniently prevent the occurrence of mold. ●The effect lasts for about two weeks (effect varies depending on usage environment). Regular use of the product will increase the anti-mold effect and keep the surface clean thanks to the effects of the Gemini-type disinfectant ingredient. This will make regular cleaning easier. It is effective to alternate between "treating the entire bathroom" and "point treatment." ●Also has antibacterial and antiviral effects! (Not effective against all bacteria and viruses.) ●One bottle is enough for 8 uses! (When treating the entire bathroom) ●Fragrance-free. [Product name] Anti-mold agent for bathrooms 【component】 Ethanol, Gemini-type disinfectant, glycerin fatty acid ester [Applications] Anti-mold, anti-bacterial, anti-viral for bathrooms [Estimated processing volume] For whole bathroom treatment: 5 pumps per bathroom For point processing: 1 push per 40 x 40 cm [How to use] ★ Preparation before use ・If there is mold or mildew stains, remove them and rinse thoroughly with water. (Even if mold or mildew stains remain, this will help prevent the mold or mildew stains from spreading any further.) -Close the bathroom window and turn off the exhaust fan. - Cover or remove from the bathroom any items made of copper, brass, or galvanized iron (product examples: metal fittings, drain traps, etc.), items that can be put in the mouth such as toothbrushes, laundry, towels, animals, and plants. - If there is a fire source in the bathtub, such as an inner kettle bathtub, extinguish it and turn off the main valve. ★Processing method ・Can be used whether the bathroom is wet or dry. <Treatment for the entire bathroom> (for general household bathrooms) (1) Extend your arm from the entrance to the bathroom and pump five times diagonally upwards, changing direction so that the medication is spread evenly throughout the bathroom. - When spraying, hold the can upright. (2) Keep the bathroom door closed for at least 10 minutes. <Points Processing> - In areas where you are usually concerned about black mold or pink slime, apply one push per 40 x 40 cm from a distance of about 50 cm. ・When tilting the can towards the floor or other surface, if pressing the button does not spray, hold the can upright and press the button once to allow it to spray. ★After processing - Dispose of the problem promptly, immediately leave the bathroom and close the door. After keeping the door closed for at least 10 minutes, turn on the exhaust fan and ventilate the room sufficiently (10 to 20 minutes) before entering. If the switch for the exhaust fan is in the bathroom or if there is no exhaust fan, keep the door closed for at least 90 minutes before entering and ventilating the room. ・There is no need to rinse the bathroom after treatment. Daily cleaning can be carried out, but scrubbing the treated surface or pouring a lot of water on it may result in the effect not lasting. ★How to use it properly -It is effective when used as a finishing touch after cleaning the bathroom. ・In areas prone to black mold or pink slime, it is effective to frequently perform spot treatments. [Precautions for use] ・This is not a mold remover. (It does not have the effect of removing mold stains.) - Always read and fully understand the product label before use. ・Follow the prescribed usage instructions. - Be sure to turn off gas water heaters, pilot lights for inner kettle bathtubs, heaters, etc., and turn off the main gas valve. - Before spraying, carefully check the direction of the nozzle to avoid getting the medicine on your face. ・Do not spray towards the human body. Also, do not inhale spray particles directly. -People with a predisposition to allergic reactions or rashes should avoid touching or inhaling the medication. ・Do not allow children to use this product. - Avoid having anyone other than the person spraying enter the room while spraying is in progress. ・If you feel strong irritation, cover your nose and mouth with a mask or handkerchief. - Treatment is limited to 5 pushes at a time, and treatment for the entire bathroom and treatment for specific areas will be carried out separately. ・Do not enter the bathroom when the door is closed. - After spraying, if the medicine leaks out and causes irritation even when the door is closed, close the gap in the door. - If the switch for the exhaust fan is inside the bathroom or if there is no exhaust fan at all, close the door for at least 90 minutes before entering and ventilating the room. - Avoid direct contact with ventilation fans, bathroom dryers, etc. ・If the medication comes into contact with copper, brass, or tin objects, or toothbrushes or other objects that are placed in the mouth, rinse them off thoroughly with water. ・The product may not be as effective in places where a large amount of water or hot water is applied. If the effect is not apparent, increase the frequency of use. -If the medication comes into contact with your skin, wash it thoroughly with soap and water. - If the product gets into your eyes, rinse immediately with plenty of water without rubbing. If inhaled, leave the area and get fresh air. ・If you experience any abnormalities in your body, bring this product with you and consult a doctor. ・Store in a cool place out of reach of children, avoiding the inside of a car in summer or around fan heaters. - Do not store the can near water or in humid places as it may rust and explode. When disposing of the product, do so outdoors in a well-ventilated area away from fire, by repeatedly pressing the button until the spraying sound stops to release the gas, and dispose of the product in accordance with local regulations. [Beware of fire and high temperatures] ・This is a flammable product that uses high-pressure gas and is dangerous, so please observe the following precautions. (1) Do not use near flames or fire. (2) Do not use large amounts in rooms where open flames are used. (3) Do not place the product in direct sunlight or near a fire or other source of heat where the temperature may reach 40 degrees Celsius or above, as it may burst if exposed to high temperatures. (4) Do not put in fire. (5) Use it up and throw it away. High pressure gas: LPG