RakuHapi Air Conditioner Anti-Mold Gap Wiper Wet Type Fragrance-Free 1 Set 1 Piece

Cleans and mold-proofs the inside of your air conditioner's air outlet! The special wiper reaches deep inside the air conditioner's air outlet, preventing mold growth with just a wipe. It also removes dust and black mold stains (although it does not remove all mold). ●Simply wipe the air conditioner's air outlets and gaps to prevent mold from reaching deep within for up to two months! Eliminates mold-causing bacteria in air conditioner air outlets and prevents mold growth! *Depends on usage environment. ●The secret to its effectiveness is its double sterilization system. - Penetrating disinfection: The anti-mold ingredients penetrate deeply, thoroughly disinfecting even mold hidden deep within dirt that cannot be completely removed! - Anti-mold coating: The ingredients reach deep into the tiny scratches where mold hides, providing thorough sterilization and long-lasting effects! *This does not eliminate all bacteria. ●Anti-mold sheet with five effects. - Anti-mold: Anti-mold coating lasts up to 2 months (*Depends on usage environment). - Disinfection: 99% sterilization (※Does not sterilize all bacteria). - Deodorization: Removes moldy odor. -Removes dirt: Removes dust and black mold stains. -Dust guard: Prevents dust from sticking. ●Special wiper that reaches deep into the air conditioner air outlet. -Slim: Maximum width 25mm, making it easy to use even in small areas. - Flexible elasticity: Flexibly fits the curves of the inner wall. - Wave-shaped head: The wave-shaped unevenness also scrapes off dirt. ●Wet type, fragrance-free. [Product name] Anti-mold wet sheet for air conditioner outlets [Set contents] ・Wiper (grip: 1 piece, head: 1 piece) ・Mold prevention sheets: 4 sheets 【component】 Antifungal ingredients (cetylpyridinium chloride, isopropylmethylphenol), cleaning ingredients (non-ionic surfactants), dust guard ingredients, coating agents, deodorants [Material] Sheet: Polyester Wiper: Polypropylene 【humoral】 neutral 【size】 Sheet: Approx. 215mm x 40mm Wiper: Total length approx. 375mm [How to use] ★How to assemble the wipers ・Place the round hook on the head and push the grip firmly into the head insertion hole. It is removable and can be stored compactly. ★How to install anti-mold sheet (1) Cover the head with the anti-mold sheet. (2) Secure the anti-mold sheet by passing the round hook through the hole (notch) on the edge of the sheet. ★How to use (1) Turn off the air conditioner and be sure to unplug it from the outlet. (If you cannot unplug it, turn off the breaker.) (2) When the power is turned off, the flap (upper and lower air direction louvers, air direction plate) at the air outlet is closed, so please open it slowly by hand. (3) Insert the wiper along the inner wall from the air conditioner's air outlet and wipe. ・One sheet can prevent mold inside the air outlet of one air conditioner. (If you are particularly concerned about dirt, use a second sheet.) -You can use it on either side. [Precautions for use] ・Do not use for any purpose other than intended. - Cannot be used with air conditioners that do not have a flap (upper and lower air direction louvers) at the air outlet that opens. - Do not use on air conditioner fins, blower fans, outdoor units, or air conditioner electrical components (sensors, electronic boards, switches, or motors). -Wash your hands thoroughly with water after use. -If you have sensitive skin, use kitchen gloves. ・Do not rub your eyes or face with your hands after touching the sheet. If the product gets into your eyes, rinse immediately with water. - The sheet will lose its anti-mold effect once it dries, so use it immediately after taking it out of the bag. ・Do not leave the sheet out of the bag for a long period of time, as this may cause discoloration of the area where it is placed. ・When moving the air conditioner flaps (up and down louvers, air deflectors), move them slowly. Moving them too quickly can cause them to break. ・Do not use too much force when using the product. The louvers may come off or the fan or wipers may be damaged. ・Do not force the wiper head into gaps that it will not fit in. This may cause the sheet to come off or damage the wiper. - If the sheet comes off, secure it firmly with a rubber band or something similar. ・The sheets do not dissolve in water, so do not flush them down the toilet. - When the wiper head becomes dirty, wash it with water and dry it thoroughly. - Keep out of reach of children, near open flames, in direct sunlight, or in high temperatures.