Atom Paint Water-Based Concrete Floor Top #11 Green 1.6L 00001-16121 1 Can

Catalog number: 00001-16121 Features: ●The coating is hard, so it is resistant to wear and has a dust-proof effect. ●This product is a major improvement on Atomix's Floor Top #1400, and has significantly improved resistance to contamination. ●The color is unified as it belongs to the "Atom Floor Top Series", which is well-known for commercial use, so you can rest assured when repainting or repainting Floor Top #1400. ●The coating is hard and resistant to wear, so you can reduce the frequency of repainting, which also leads to cost reduction. ●Even when painted at low temperatures, it is less susceptible to the effects of temperature and humidity during the drying stage, and is less likely to cause problems such as cracks. ●Since it is water-based, there is no solvent odor and there is no need to worry about fire. It dries quickly, so you can walk on it in about 2 hours. Uses: ●For concrete floors such as verandas, terraces, balconies, garages, entrances, warehouses, machine rooms, and offices. Specifications: ●Color: Green ●Capacity (L): 1.6 ●Drying time: Summer/30 to 60 minutes, Winter/2 to 3 hours ●Touch dry time: Summer/30 to 60 minutes, Winter/2 to 3 hours ●Time before recoating: 3 hours or more (6 hours or more in winter) ●Number of coats: 2 ●Application area (m2): 5 to 7 (equivalent to approximately 4 tatami mats) ●Application area: 5 to 7 m2 (equivalent to approximately 4 tatami mats) ●Liquid type: Water-based, glossy ●Diluter: Normally not required - if thick, dilute with tap water up to 5% ●Product compliant with Building Standards Act: F☆☆☆☆ ●2 coats ●Touch dry time: 0.5 to 1 hour (summer), 2 to 3 hours (winter) ●Time before recoating: 3 hours or more (summer), 6 hours or more (winter) Material/Finish: ●Synthetic resin (acrylic) Caution: ●Do not paint new concrete or mortar surfaces until at least 4 weeks have passed since pouring. * Be sure to apply a water-based primer to unpainted concrete. * Do not release heavy objects after 24 hours. * Cannot be applied to waterproofed surfaces such as asphalt waterproofing, sheet waterproofing, or FRP waterproofing. * Avoid painting when the temperature is below 5°C or the humidity is above 85%.