Atom Paint Water-Based Concrete Floor Top #21 American Gray 14L 00001-16142 1 Can

Catalog number: 00001-16142 Features: ●The coating is hard, so it is resistant to wear and has a dust-proof effect. ●This product is a major improvement on Atomix's Floor Top #1400, and has significantly improved resistance to contamination. ●The color is unified as it belongs to the "Atom Floor Top Series", which is well-known for commercial use, so you can rest assured when repainting or repainting Floor Top #1400. ●The coating is hard and resistant to wear, so you can reduce the frequency of repainting, which also leads to cost reduction. ●Even when painted at low temperatures, it is less susceptible to the effects of temperature and humidity during the drying stage, and is less likely to cause problems such as cracks. ●Since it is water-based, there is no solvent odor and no need to worry about fire. It dries quickly, so you can walk on it in about 2 hours. Uses: ●For concrete floors such as verandas, terraces, balconies, garages, entrances, warehouses, machine rooms, and offices. Specifications: Color: American gray; Capacity (L): 14; Drying time: Summer/30-60 minutes, Winter/2-3 hours; Touch-dry time: Summer/30-60 minutes, Winter/2-3 hours; Time before recoating: 3 hours or more (6 hours or more in winter); Number of coats: 2; Coating area (m2): 40-60 (equivalent to 24-36 tatami mats); Curing time: 3 hours or more (6 hours or more in winter); Semi-cured drying time: 3 hours or more (6 hours or more in winter); Capacity (kg): 3 hours or more (6 hours or more in winter); Paint area: 40-60 m2 (equivalent to approximately 24-36 tatami mats); Liquid type: Water-based, glossy; Thinner: Usually not required; when thick, dilute with tap water up to 5%; Building Standards Act compliant product: F☆☆☆☆; Material/Finish: Synthetic resin (acrylic) Caution: * Paint new concrete or mortar surfaces at least 4 weeks after pouring. * Be sure to apply a water-based primer to unpainted concrete. * Wait 24 hours before lifting heavy objects. * Cannot be applied to waterproofed surfaces such as asphalt waterproofing, sheet waterproofing, FRP waterproofing, etc. * Avoid painting when the temperature is below 5°C or the humidity is above 85%.