Ikari Kabikrin Paste 120g 1 piece

Experience it! Powerful mold extermination!! You'll be amazed at how much stubborn mold you can remove! Highly adhesive paste traps and repels mold! Kabicrin is a highly adhesive paste-like mold remover made using a special manufacturing process, which allows the active ingredient hypochlorous acid to be maximally effective against mold and maintain its effectiveness. ●The active ingredients adhere to the mold without dripping, providing powerful effects! ●Pinpoint and easy work without waste! ●Low odor and no scattering. Safe and easy! ●For severe mold in the following places: Mold in the silicone cement joints of bathrooms, washrooms, and sinks. ●Can be applied without waste. ●Does not splatter. ●It's easy to see where to use it! [Liquid type] Alkaline [Main uses] Removing mold from silicone cement joints in bathrooms, washrooms and sinks. [Things that cannot be used] ・Metal products such as iron, aluminum, brass, etc. (anything that rusts) ・Sand wall, fiber wall, plaster wall, wallpaper wall (not recommended as they will be bleached) - Animal net brushes, brushes, wooden products, and leather products. [How to use] - Before use, open the window and turn on the exhaust fan to ensure good ventilation. -Please wear rubber gloves, a mask, and protective glasses. - Loosen the black cap counterclockwise to send air into the tube, then tighten the cap and shake, then apply enough to cover the mold. - For newly appearing mold, silicone joints, etc., leave it for about 15 to 60 minutes. - For old mold, cement joints, etc. - leave it for about 1 to 2 hours. After leaving it on, rinse it off with water. (Hot water is not recommended as it will cause a strong odor due to the evaporation of chlorine.) For areas that are difficult to wash with water, wipe them clean with a damp cloth. *After leaving it on, it can be easily removed by brushing it with a toothbrush or something similar. *If the stain does not come off, apply and wash repeatedly or extend the leave-on time to a maximum of 12 hours. ★When using for the first time, apply to an inconspicuous area and check for discoloration or fading. Within 1 to 5 minutes, rinse with running water or wipe thoroughly with water and then wipe off with a cloth. *When using on window frames, kitchen or bathroom silicone parts, be careful not to let the liquid drip and do not leave it on for more than 30 minutes. *When applying to a vertical surface, be careful not to let the liquid drip. If any dripping liquid gets on the floor or bathtub, it may discolor or discolor the material. If any dripping occurs, rinse it off immediately with water. [Storage method/storage period] After use, remove the air from inside the tube, place it in the special bag provided, and close the zipper to store it. ・Please use within six months after opening. [Caution] - Be sure to read the attached instruction manual before use. ・Do not use if you are not feeling well or have respiratory or heart disease. *Chlorine-based. Do not mix. - If used (mixed) with acidic products, it can produce harmful chlorine gas, which is dangerous. - Always use in a well-ventilated area. ・Keep out of reach of children. - If the liquid gets into your eyes, rinse immediately with water.