Wearable heart rate sensor standard set WHS-1/RRD-1 1 set

This is a compact heart rate sensor with two modes: wireless and memory. It can simultaneously measure heart rate (rate, cycle, waveform), body surface temperature (*1), and 3-axis acceleration. The compact design does not interfere with your daily life. In memory mode, measurement data for seven consecutive days can be stored in the WHS-1 unit. In wireless mode, by adding optional sensors, one receiver can measure up to 10 people simultaneously. (*2) 3-axis acceleration measurement can detect lying down, falls, etc. The standard simple display software allows you to monitor each measurement value and save the data (in CSV file format) to your computer. (*1) Body surface temperature is measured inside clothing. (*2) By law, this product cannot be used on aircraft or outside of Japan. Note: To use this product, electrode pads or belt electrodes are required. Note: This product is not a device intended for the diagnosis, treatment or prevention of disease. Measurable biological information: Heart rate (rate, cycle, waveform*1), body surface temperature, 3-axis acceleration External dimensions: Sensor (WHS-1)/40.8mm long x 37.0mm wide x 8.9mm thick, weight 13g (including battery) Receiver (RRD-1) / Length 21.5mm x Width 64.5mm x Thickness 9.0mm, Weight 7g Wireless: 2.4GHz band advanced low-power data communication system, range: approx. 20m (straight line) Memory: 16Mbit flash memory Approx. 7 days*2 Power supply: 1 button battery (CR2032) Battery life: Wireless mode/approx. 8 days (when measuring heart rate waveform/approx. 2 days), Memory mode/approx. 8 days 3-axis acceleration: X, Y, Z detection range ±4G Operating environment: Temperature: +5 to +45°C, Humidity: 30 to 80% RH (no condensation) Set Includes: Wearable heart rate sensor WHS-1 1 unit USB receiver RRD-1 x 1 Storage case x 1 1 x micro USB cable 1 x CR2032 battery 1 waterproof jacket for WHS-1 Standard Set up CD (standard software) 1 piece Warranty Standard software compatible OS: Windows(R)7 SP1/8.1/10 Note: The RRD-1 is compatible with PCs with USB 2.0 or higher/A type. If you connect it via a USB converter from a standard other than USB 2.0 A type, we cannot guarantee operation. Note) Recommended PC specifications for simultaneous reception by 10 people: CPU Intel Core(TM)i7 or higher, memory 8GB or more *1 This is not an electrocardiogram waveform. *2 Based on a heart rate of 60 beats per minute. If your heart rate is higher, the memory mode storage period will be shorter.