Catalog number: VP4 Features: ● Dry PVC diamond cutter that can cut, chamfer, and finish the surface of PVC pipes. ● Exquisite sharpness for small to large diameter pipes, no burrs or burrs. Applications: ● For cutting, chamfering, and finishing the surface of PVC pipes, and cutting kitchen panels. ● Exquisite sharpness for small to large diameter pipes, no burrs or burrs. Specifications: ●Outer diameter (mm): 105 ●Blade thickness (mm): 1.7 ●Hole diameter (mm): 20 ●Tip height (mm): 3 ●Maximum operating speed (rpm): 14500 ●Maximum operating speed (min-1): 14500 ●Included ring hole diameter (mm): 15 ●Thickness (mm): 1.7 ●Dry type Material/Finish: ●Base metal: Tool steel (SK-5) ●Tip: Diamond abrasive grain Caution: ●Before use, in addition to the following, be sure to read the instruction manual included with the product, the information on the main unit and case, and the instruction manual of the machine being used carefully and fully understand them before use. ●Be sure to properly install the protective cover (wheel guard) specified by the machine manufacturer. ●Cut zigzag with the cutting wheel. Never cut curved lines, cut diagonally (without using a guide), pry, or use the side. ●Never touch the rotating wheel with your hands or body. ●Operators must wear protective equipment such as dustproof glasses, safety shoes, and protective hats. If the wheel breaks, there is a risk of direct impact with broken pieces and serious injury.
