Catalog number: HNC05R Features: ●A cheap and convenient kit that allows you to easily use blind nuts (lobster knurled nuts). ●Comes with ready-to-use lobster knurled nuts. Applications: ●For attaching parts to the steel and plastic parts (bumpers, etc.) of cars. ●For attaching parts to aluminum building materials such as exteriors. ●Can be applied from one side even to plastic plates which cannot be welded●The main body is equipped with a rubber stopper to prevent the wrench from falling off during work Specifications: ●Total length (mm): Main body: 12 x 17●Compatible nut diameter: M5●Compatible nut diameter (mm) aluminum/steel: 7●Compatible nut diameter (mm) stainless steel: 7●Nut usage range: M5●Crimping plate thickness (mm): 0.5-2.5●Drill hole diameter (mm): 7.1●Compatible thread: M5 x 0.8●Nut outer diameter (mm): 7.0●Set contents: M5 nut main body x 1, hex socket mandrel (face width 4 mm) x 1, steel nuts (NSD5MR) x 8●Torque strength (N・m): 9.3●Thread shear strength (N・m): 8.5 Material/Finish: ●Steel Caution: ●A 17 mm wrench (open end wrench recommended) and a hex wrench (face width 3-5 mm) are required when using. ●Before starting work, be sure to read the instruction manual carefully and fully understand it before using the product. ●Be careful not to overtighten the nut, as this may damage the threaded portion of the Lobster Knurled Nut. ●Use the Lobster Knurled Nut within the appropriate crimping plate thickness. If the appropriate crimping plate thickness is not met, the nut will not perform to its full potential. ●Be careful with the pilot hole diameter. If it is too large, it may come loose or rattle.
