Catalog number: HNC06R Features: ●A cheap and convenient kit that allows you to easily use blind nuts (lobster knurled nuts). ●Comes with lobster knurled nuts that can be used immediately. Applications: ●For attaching parts to the steel and plastic parts (bumpers, etc.) of cars. ●For attaching parts to aluminum building materials such as exteriors. ●Can be applied from one side even to plastic plates which cannot be welded●The main body is equipped with a rubber stopper to prevent the wrench from falling off during work Specifications: ●Total length (mm): Main body: 12 x 17●Compatible nut diameter: M6●Compatible nut diameter (mm) aluminum/steel: 9●Compatible nut diameter (mm) stainless steel: 9●Nut usage range: M6●Crimping plate thickness (mm): 1.0-3.5●Drill hole diameter (mm): 9.1●Compatible thread: M6 x 1.0●Nut outer diameter (mm): 9.0●Set contents: M6 nut main body x 1, hex socket mandrel (5 mm across flats) x 1, steel nuts (NSD6MR) x 6●Torque strength (N・m): 17.6●Thread shear strength (N・m): 14.1 Material/Finish: ●Steel Caution: ●A 17 mm wrench (open end wrench recommended) and a hex wrench (3-5 mm across flats) are required when using this product. ●Before starting work, be sure to read the instruction manual carefully and fully understand it before using the product. ●Be careful not to overtighten the nut, as this may damage the threaded portion of the Lobster Knurled Nut. ●Use the Lobster Knurled Nut within the appropriate crimping plate thickness. If the appropriate crimping plate thickness is not met, the nut will not perform to its full potential. ●Be careful with the pilot hole diameter. If it is too large, it may come loose or rattle.
