Plywood fixing bracket (for light trucks/left and right set) EA911TG-40 1 set/box

Caution: Please drive safely while observing the load weight and speed limit. To prevent the load from falling, be sure to secure the load with a rope. Do not modify this product or use parts other than those included. If the fastening parts of the metal fittings are loose, there is a risk of an unexpected falling accident, so be sure to check the fastening parts before and after driving. Please note that we are not responsible for any accidents, damage, peeling of the paint of the vehicle, etc. caused by the falling of the load. Please be sure to read the precautions on the package and use it correctly. Supports increased loading capacity of light trucks. Easily connects 12mm thick plywood to the side panels of the loading platform. It can be installed not only on the left and right sides but also on the rear swing-out. It can be easily attached to the tailgate of a light truck. The metal fittings are made of iron, so they are very strong. The plywood is firmly fixed to the side of the light truck, and the loading platform height is increased to about 90 cm. It prevents the cargo from spilling out of the loading platform or falling off, and allows for secure loading. By fixing the plywood, the height of the loading platform is increased by approximately three times, eliminating the need to make multiple trips for transportation, which leads to reduced work time. To install, simply secure the bracket with screws. When not in use, remove the plywood to keep the cargo area neat. Dimensions (W x D x H): 130 x 250 x 30 mm Thickness of plywood: 12mm - Weight(g):900 Material: Iron (plated steel sheet) Uses: For transporting lumber and waste materials For transporting fertilizer and agricultural crops For transporting cleared snow For transporting pruned garden tree branches and weeds For transporting moving luggage