Sanko Techno All Anchor C-D Type Hot Dip Galvanized Metric Screw M10 C-1060D 50 Pieces

Catalog number: C-1060D Features: ●Easy installation by simply driving in the core rod. ●You can see when installation is complete at a glance, allowing you to manage the installation. ●Can be installed directly from above the object to be attached. ●The body diameter and thread nominal size are the same. Uses: ●For concrete●Installing handrails, fixing fence posts, etc. Specifications: ●Screw size: M10●Total length (mm): 60●Screw length (mm): 25●Maximum thickness of object (mm): 6●Drill hole diameter (mm): 10.5●Maximum tensile load (kN): 10.2●Embedding depth (mm): 40●Drill diameter (mm): 10.5●Drilling depth (mm): 50 or more●Boxed Material/Finish: ●Steel●Hot-dip galvanized●Surface treatment: Hot-dip galvanized (main body), SV (Silver Big) treatment (core rod) Set contents/Accessories: ●Nut/washer specifications●Nut and washer Note: ●The maximum tensile load is the value when the concrete strength is Fc=21N/[[MM2]]. ●Be sure to remove the chips from the pilot hole. ●Set the nut and washer on the anchor, then insert it into the hole and hammer it in. ●Drive the core rod vertically and make sure it is firmly driven in until it touches the top of the main body. ●We recommend using the dedicated hand holder to ensure safe and reliable installation.