Toyox Steam Hose Toyo Silicone Steam Hose Inner diameter 19mm x outer diameter 28mm Length 5m TSISTM-19-5 TSISTM-19-5 1 roll

Catalog number: TSISTM-19-5 Features: ●The fluid is steam and high-temperature water. ●Half the weight of conventional steam hoses, it is light and soft, and does not crack easily, allowing for long-term use. ●Low odor and no rubber smell, reducing discomfort. ●[Long-lasting steam hose] Even with long-term use, the surface of the hose is less likely to crack, preventing foreign matter from entering due to broken pieces of the hose. ●[Low-odor steam hose] Made of silicone rubber, it has a low odor and prevents odor transfer to products. ●[Legal compliance] Compliant with the Food Sanitation Act and RoHS2 for peace of mind. Applications: ●For steam and high-temperature water (for steam drains, steam cleaning, heat-resistant high-temperature water piping). Specifications: ●Length (m): 5 ●Inner diameter (mm): 19 ●Outer diameter (mm): 28 ●Operating pressure (MPa): 0 to 0.3 (steam up to 140°C), 0 to 0.5 (high-temperature water up to 140°C) ●Allowable bending radius (mm or more): 180 ●Operating temperature range: -30 to 140°C ●Complies with Ministry of Health, Labor and Welfare Notification No. 595 of 2012 ●Registered with FDA DMF Type [R2] No. 25486 ●Color: Gray/with green line Material/Finish: ●Main material: Silicone rubber ●Reinforcement: Polyester thread Caution: ●The fluid used is steam and high-temperature water. Do not use for food or chemical cleaning applications. Also, never use with animal or vegetable oils above 70°C. ●Steam (saturated steam up to 140°C, up to 0.3MPa) should be used intermittently with one side of the hose open as a rule. Never use with fixed piping (connected at both ends). It will shorten the life of the hose. ●Silicone rubber has high gas permeability. Please be careful when using gas. ●Please check in advance for applications that require safety considerations. Do not use for applications where the product will be implanted or injected into the body, or where there is a risk that part of the product may remain in the body. ●Use within the operating temperature and operating pressure ranges. *Do not use in negative pressure applications. The product may become deformed and become unusable.