Toyox Hose Fitting (Brass) Toyo Connector TC3-PB Type Compatible with 9mm Hose Fitting Standard R3/8 TC3-PB9-R3/8 TC3-PB9-R3/8 1 pc

Catalog number: TC3-PB9-R3/8 Features: ● A joint (male thread) exclusively for Toyox hoses (excluding silicone hoses). ● [Leak and pull-out prevention hose joint] A hose joint that prevents production problems such as fluid leakage and hose pull-out, enabling stable production. ● [Standardization of installation work] A hose joint that allows uniform installation work by simply tightening the cap nut to the end. In addition, there is no need for additional tightening work like with hose bands. ● [Energy-saving hose joint] Compared to general bamboo shoot joints, the effective cross-sectional area is wider and pressure loss can be reduced, so you can expect a reduction in power consumption. ● [Easy installation] Compared to conventional joints, the hose mouth is the same diameter as the hose, making it easier to insert the hose and reducing piping time. ● [Risk reduction] Prevents piping problems such as leaks and pull-outs due to vibration and earthquakes. ● [Reusable hose joint] When reusing, simply replace the parts inside the joint. Uses: ● For hose piping for water supply and drainage, oil, chemicals, air, etc. Specifications: ● Suitable hose inner diameter x outer diameter (mm): 9 x 15 ● Suitable hose inner diameter (mm): 9 ● Suitable hose outer diameter (mm): 15 ● Thread dimensions: R3/8 ● Dimension L (mm): 51 ● Dimension Φd1 (mm): 7 ● Dimension HEX1 (mm): 27 ● Pressure-resistant hose fitting ● Operating pressure and operating temperature range: Conforms to the compatible hose standard ● For indoor use only Material/Finish: ● Main material: Brass, polyacetal resin Caution: ● This product is a hose fitting exclusively for Toyox hoses. If it is connected to a hose other than that of another company or a compatible hose, it may not be possible to fully demonstrate or maintain its performance, so we do not guarantee anything. ● Do not use the hose in an extremely bent state near the fitting. Use it with a bending radius larger than the minimum bending radius of the hose. ● Tighten the cap nut until there is no gap. If you use it with a gap, problems such as fluid leakage and hose coming off may occur. ●This product is for indoor use only. Do not use outdoors. When reusing this product, be sure to replace it with a new sleeve. Also, be sure to use a new hose. ●Please check the material of the flow path (inner surface) of this product. Depending on the type of fluid, corrosion or fluid leakage may occur.