Toyox Antistatic Fluorine Hose (Chemical Resistant/Food Grade) Toyofusso E Hose Inner Diameter 19mm x Outer Diameter 26mm Length 5m FFE-19-5 FFE-19-5 1 Roll

Catalog number: FFE-19-5 Features: ●Anti-static (static) pressure-resistant fluorine hose for pressure transfer. ●The inner surface is made of 4-fluorinated fluorine resin (modified ETFE), the outer surface is coated with polyurethane resin, and a conductive band is incorporated into the innermost layer to prevent static electricity (static). ●Unlike products containing anti-static agents, the anti-static (static) effect lasts for a long time. ●Features include chemical resistance, non-elution, non-adhesive (reduced coloring and aroma), and low odor. ●[Washability] Fluorine hoses are non-adhesive and water-repellent, so fluids are less likely to remain and are easy to clean. They are also heat-resistant and can be used for high-temperature cleaning and chemical cleaning up to 80°C. ●[Legal compliance] FDA (U.S. Food and Drug Administration) registered product, compliant with RoHS2 revised regulations, safe and secure. Applications: ●Anti-static, for transporting chemicals, solvents, oils, cosmetics, various foods, etc. Specifications: ●Length (m): 5 ●Inner diameter (mm): 19 ●Outer diameter (mm): 26 ●Operating pressure (MPa): 0 to 1.0 (23°C), 0 to 0.5 (80°C) ●Allowable bending radius (mm or more): 135 ●Operating temperature range: -20 to 80°C ●Color: Natural transparent ●FDA DMF Type II No. 25486 registered Material/Finish: ●Main material: 4-fluorinated fluororesin (modified ETFE), polyurethane resin ●Reinforcement: Polyester thread Caution: ●Please check in advance for applications that require safety considerations. Do not use for applications that involve implantation or injection into the body, or applications where there is a risk of some of the hose remaining in the body. Do not use for medical purposes. ●This fluororesin is used for the innermost layer of this fluorohose, and is resistant to fuel oils such as gasoline and solvents such as toluene, but do not use it for fuel piping. ●When using flammable fluids (including powders), we recommend wrapping a metal wire around the hose to reduce static electricity (earthing). If you use a hose band to secure this product, be sure to ground or bond the hose band. If not grounded, the hose band will become an insulated conductor and may accumulate static electricity, which may cause discharge and ignition. If you use our special joints, tighten the nipple and the cap nut until there is no gap. ●The antistatic band of this fluoro hose is intended to prevent static electricity from building up on the hose, and cannot be used as a grounding wire, bonding wire, or other electrical connection between connected devices. It also does not have the function of de-electrifying the fluid used. ●This fluoro hose does not guarantee the prevention of accidents. Users are responsible for safety management, such as limiting the flow rate of low-conductivity and flammable fluids and reducing spray concentration.