Toyox Chemical and food-resistant fluorine hose Toyofusso hose Inner diameter 15 mm x outer diameter 22 mm Length 1 m FF-15-1 FF-15-1 1 roll

Catalog number: FF-15-1 Features: ●The inner tube is made of 4-fluorinated fluororesin, which has excellent chemical and solvent resistance and can be used for a wide range of applications. ●The laminated structure makes it softer and easier to handle than single-layer fluororesin tubes. ●The non-adhesive and water-repellent inner surface (water-repellent angle 96°) has good fluid transport efficiency and is easy to clean as it does not easily leave fluid residue. ●High transparency allows you to check the fluid for peace of mind. ●[Transparency] High transparency means the inner surface of the hose does not easily get dirty, so you can check the fluid. ●[Legal compliance] Compliant with the Food Sanitation Act (PL system), FDA (US Food and Drug Administration) registered product, and RoHS2 revised regulations for safety and peace of mind. Applications: ●For chemicals, cosmetics, food, oil-resistant, and heat-resistant piping. Specifications: ● Length (m): 1 ● Inner diameter (mm): 15 ● Outer diameter (mm): 22 ● Operating pressure (MPa): 0 to 1.0 (23°C), 0 to 0.5 (80°C) ● Allowable bending radius (mm or more): 105 ● Operating temperature range: -20 to 80°C ● Food Sanitation Act (Complies with Ministry of Health, Labor and Welfare Notification No. 196 of 2020) ● Color: Natural transparent ● FDA DMF Type [R2] No. 25486 registered ● Color: Natural transparent (with image line) Material / Finish: ● Main material: 4-fluorinated fluororesin (modified ETFE), polyurethane resin ● Reinforcement material: Polyester thread Caution: ● Please check in advance for applications that require safety considerations. Do not use for applications that involve implantation or injection into the body, or for applications where there is a risk of part of the product remaining in the body. Do not use for medical purposes. ●This fluororesin hose uses fluororesin for the innermost layer and is resistant to fuel oils such as gasoline and solvents such as toluene, but should not be used for fuel piping. ●When using flammable fluids (including powders), we recommend wrapping a metal wire around the hose for grounding (earthing) to reduce static electricity. ●Since this fluororesin hose has a laminated structure, even if the inner layer is resistant to fluids, the fluid may penetrate the inner layer depending on the conditions of use (high temperature, high pressure, etc.), causing the middle and outer layers to deteriorate and swell. ●Depending on the characteristics and conditions of the fluid, the inner layer may wear, peel off, melt, etc., so please check carefully before use.