Tornado (mixer) with timer, 5-300 rpm, SMT-104, 1 unit

It uses a small, high-output, low-cogging, low-vibration, low-noise DC brushless motor with a newly designed magnetic circuit (PAT), allowing mixing work to be performed without damaging the laboratory environment. The speed feedback system constantly responds to changes in load during mixing and maintains the set rotation speed. Safety devices include a current limiting circuit, as well as an automatic motor stop when the chuck cover is opened. The forward/reverse function allows you to change the direction of rotation with one touch even while stirring. ON/OFF and RPM settings are made using a volume control with a switch, making it easy to operate. A hand-tightened chuck is used, eliminating the need for a chuck handle, and the motor lock mechanism linked to the chuck cover allows for one-handed operation. The stirring shaft is supported by a collet system, which provides strong holding power, reduces core vibration, and also supports forward/reverse rotation (the stirring shaft diameter can be changed with an optional collet). A timer function is standard equipment and can be set to any time (in 1-minute increments, up to 99 hours 59 minutes) to automatically start and stop. The timer function is also linked to the forward/reverse function, and automatic reversal is also possible by setting the reversal time and total timer operation time. A standard mixer that achieves high power, low vibration, and low noise. Rotation speed: 5 to 300 rpm Maximum torque: 0.98N・m (10.0kgf・cm) Type with timer Rotation control: Speed ​​feedback control Motor: DC brushless motor 30W (Class B insulation/130℃) Safety features: Thermal protector, current limiting circuit, and chuck cover interlocking fail-safe function Timer function: ON/OFF timer setting range: 1 minute to 99 hours 59 minutes (in 1 minute increments), automatic reverse time setting range: 1 minute to 99 hours 59 minutes (in 1 minute increments) Attached function: forward/reverse rotation switching function Chuck: φ8mm collet type hand tightening chuck Size: 98 x 155 x 164 mm Power supply: AC100V 50/60Hz 88VA Weight: 2.5kg Accessories: Arm holder (1-5472-14), arm bar (1-5472-15), stirring rod (φ8×495mm) (1-5472-13), stirring blade propeller type (φ50mm) (1-5472-11), stirring blade fixing nut (1-5472-12) *Stand (5-5379-01) is not included.