Nylon tube, green, 6 x 4, 20M, NA0640-20-G, 1 roll

It has excellent pressure resistance, abrasion resistance, and cold resistance. It is resistant to bending fatigue and can be used stably for long periods of time. Convenient cut marks for cutting the tube are provided at intervals of approximately 500 mm. Color: Green Outer diameter (mm): 6 Inner diameter (mm): 4.0 Minimum bending radius (mm): 15 Total length (m): 20 Maximum operating pressure (MPa): 2.0 (20℃ 65% RH) Operating temperature range (℃): For air: -20 to 100 (no freezing) / For water and heat transfer oil: -15 to 90 (no freezing) Fluids used: Air, water (conditions apply), thermal catalytic oil (conditions apply) Operating pressure: 1.5MPa (at 20℃ 65%RH) Vacuum pressure used: -100kPa Operating temperature range: -15 to 90°C (no freezing) Material/Finish: Nylon (PA12) Caution: Do not apply loads such as tension, twisting, or extreme bending to the tube. This may cause the tube to collapse, burst, or come loose. Do not scratch or tangle the tube as this may cause the tube to burst. The tube's bursting pressure decreases as the temperature rises, so be sure to understand the operating pressure and ensure that you have a sufficient safety margin. Use the tube with a minimum bending radius or greater. When installing the tubes, leave sufficient slack to allow for changes in length, etc. Country of Origin: Japan Code number: 818-1409