Pulse input cable PIC-3150 1 piece

Compatible models: TR-55i-P, RTR505B, RTR505BL Material: PVC (coated wire) Measurement target: Number of pulses Input signal: Non-voltage contact input Voltage input: 0 to 27V (breakdown voltage: -5V, +27V) Detection voltage: Lo: 0.5V or less, Hi: 2.5V or more Chattering filter ON: 15Hz or less, OFF: 3.5kHz or less For a 0-3V square wave signal: High level pulse width chattering filter ON: 35 ms or more Chattering filter OFF: 180µs or more Low level pulse width chattering filter ON: 12 ms or more Chattering filter OFF: 100µs or more Response polarity: Specify either Low → High/High → Low Maximum number that can be counted: 61439/recording interval Input impedance: Approx. 100KΩ pull-up Maximum jitter width: Normal/approximately 0.01 seconds, during communication/approximately 0.1 seconds The above are the specifications when connected to a TR-55i-P.