Catalogue number: 536869 Features: ●No need to drive it in, this is a high-strength anchor that can be screwed in. ●Can be cast with an impact wrench. ●Easy to remove after casting and can be used for temporary structures. ●Sawtooth shape quickly cuts into concrete holes. ●Non-expanding anchor that can reduce anchor distance and edge distance. ●Can be reused by using a dedicated check gauge. ●ETA rating for applications similar to European seismic C1 and C2. Applications: ●For concrete and dense stone. ●Installation of various frames. ●Equipment construction. ●Exterior handrail construction, etc. ●For ordinary concrete and dense masonry. ●Removable for temporary fixing in temporary structures. Specifications: ●Screw size: M12 ●Screw length (mm): 70 ●Total length (mm): 70 ●Maximum thickness of object to be attached (mm): 10 ●Drill diameter (mm): 12 ●Standard installation torque (N・m): 650 ●Maximum tensile load (kN): 22.54 ●Maximum shear load (kN): 39.76 ●Two-sided width dimension (mm): 17 ●Embedded depth (mm): 65 ●Pre-drilled hole diameter (mm): 12 ●Allowable safety load (kN): 7.7 ●Allowable shear load (kN): 15.2 ●Boxed Material/Finish: ●Steel ●Surface treatment: Zinc plating Caution: ●Unevenness adjustment can be loosened up to 2 turns. ●When reusing, use a check gauge and only usable parts can be reused.
