Fumakilla Bath Foam Cleanser Green Apple Scent 230g 1 piece

Twice the cleaning power! 99.99% sterilization! Super-adhesive foam power! Lifts and removes stubborn dirt! ●Bathtub and accessories Just leave it overnight! ●The bath heater is also neat and tidy! ●Effective against stubborn stains* that cannot be removed by regular cleaning! (*Stubborn dirt consisting of soap scum, protein, sebum, etc.) ●Attacks dirt and germs with instant foaming power! ●The cleaning ingredients penetrate thoroughly and remove dirt! ●Green apple scent 【Uses】 Cleaning bathtubs, boilers and bathroom accessories 【component】 Alkaline agent (carbonate), bleach activator (percarbonate), chelating agent (edetate), surfactant (2% sodium alpha-olefin sulfonate), fragrance 【humoral】 Weakly alkaline [Things that cannot be used] -Wood products, painted surfaces, marble and other natural stones ●Bacteria bath Aluminum and copper products [How to use] *Please use hot water or leftover water that is about 40 degrees. *Can also be used with leftover bath water containing bath salts. (Depending on the water quality and water pressure, there may be less foaming or the foam may not last as long.) (1) Add hot water to the bathtub and add this product. If there is not much hot water left, add more water and pour this product evenly over the entire surface of the water. (If you are using a bath heater type, let it heat up for 5 to 10 minutes before putting in your small items.) If there is a cover or filter on the hole, remove it. (2) Make foam and soak small items Turn on the shower or faucet at full capacity for about 10 seconds, and direct the water forcefully toward the surface to create bubbles. After that, soak bathroom accessories such as a chair, washbasin, bathtub lid, and plastic toys in the bathtub overnight (8 to 12 hours). *If the small items cannot be completely covered with foam or if they float up, dip them in the cleaning solution or pour cleaning solution over them. *If you are not applying it to small items, you can use it without lathering. (3) Washing small items Remove small items and wash them with water. If any dirt remains, gently rub it off with a sponge. (4) Washing the bathtub and boiler For hot water supply type After draining, rinse the bathtub thoroughly with water. For bath heater types (1-hole and 2-hole) After draining and rinsing, fill the water again with water up to about 5 cm above the hole and wash the bath heater. <In the case of one hole (forced circulation boiler)> After running the reheat function for about 5 minutes, drain the water and rinse the bathtub thoroughly with water. <In the case of two holes (natural circulation boiler)> Insert a hose into the pilot hole and turn on the water forcefully to wash away the dirt inside the kettle, then drain the water and rinse the bathtub thoroughly with water. To keep your bathtub and bathroom clean, we recommend using it every 1-2 months. [Caution] - Always follow the instructions for use and do not use for purposes other than intended. - Use immediately after opening. ・Do not leave it for more than overnight. ・Do not take a bath while washing. - If your hands are easily dry, wear rubber gloves. ・Do not get powder or liquid in your eyes. ・Do not use with other detergents. - In old kettles, scale and rust may clog the pipes and rubber gaskets, causing water to stop leaking temporarily. Using this product may clear the clog and allow water to leak again.