Catalog number: GJ2-4 Features: ●The capacity chart is printed on the back of the mount, so you can immediately see which size to choose according to the material you want to pull. ●In addition, the operating procedures are written, so even beginners can use it with confidence. ●The tip is equipped with a special cap that reduces friction resistance. (PAT.No.171613 (ROC.) ● The hexagonal threaded part can be turned with a ratchet wrench or box wrench. ● Available in three sizes, 75mm, 100mm, and 150mm, to suit the item to be pulled. Applications: ● For pulling out gears, pulleys, etc. from their shafts. Specifications: ● Suitable pulleys (mm): 50-100 ● Claw reach (mm): 70 ● Breaking load (kN): 35 ● Press screw hex size (mm): 17 Caution: ● Be sure to check that the capacity is met before use. ● The pulling force may be greater than expected due to adhesion or seizure caused by rust on the item to be pulled, so please use a model with sufficient capacity. ● Do not use in a way that applies an uneven load. ● Do not turn the claws upside down to pull out inner rings, etc.
